Universal pure epoxy
REDPRIME PE 1230
The workhorse anticorrosive for almost every area of the ship.
- REDTOP PU 5245Finish
- REDPRIME PE 1230Primer
- Steel substrate
A two-component, modified phenalkamine-cured universal pure epoxy that can be used as primer, intermediate or finish coat. It dries fast, cures normally at low temperatures and gives a tough, abrasion-resistant film with excellent corrosion protection. Suitable for properly prepared carbon steel, stainless steel, galvanised steel and shop-primed steel.
Key data
- Category
- Anticorrosive, Topcoats & Tie Coats
- Generic type
- Universal pure epoxy
- Marine
- Hull, decks, holds and tanks.
- Industrial
- Offshore and coastal environments such as refineries, power stations, bridges and buildings; widely used for industrial buildings.
Features
- Excellent anticorrosive performance
- Fast drying
- Good recoatability
- Suitable for most areas, including ballast tanks
Where it's used
- Superstructure
- Accommodation and bridge exterior, exposed to weather and UV.
- Compass deck
- Top of the bridge, the highest deck on board.
- Hatch covers
- Covers over the cargo holds, exposed to weather and cargo handling.
- Weather deck
- Open main deck exposed to sea spray and foot traffic.
- Freeboard / topsides
- Hull side above the waterline.
- Waterline / boot-top
- The band that alternates between air and sea as the draught changes.
- Vertical bottom
- Immersed hull sides below the waterline.
- Flat bottom
- The flat underside of the hull.
- Ballast tanks
- Double-bottom and peak tanks repeatedly filled with seawater.
- Cargo holds
- Holds that carry bulk cargo and take heavy abrasion.
Technical data
Contact
Tell us about your vessel. Our technical team will recommend a coating system and get back to you.